Arduino have just announced a bunch of new boards, including one with an on board FPGA chip (plus a SAMD21 Cortex-M0+, plus an ESP32 WiFi and Bluetooth Module). A Field Programmable Gate Array (FPGA) chip is possibly the most impressive piece of electronics going. They are essentially a way of creating entirely custom digital electronic circuits (resistors and transistors) all inside a tiny chip, and completely reprogrammable – genius!
See more about the Arduino Vidor CAN bus support after the break.
I’ve been writing some software for a Wifi based CAN data logger for the ESP8266 in the Arduino platform, and have been getting a bit of a strange error. It appeared to be related to using the std::string functions in my code – and although I have used this in other sketches without issue, I suddenly received the following error as soon as I simply declared a std::string variable:
c:/users/scott/appdata/local/arduino15/packages/esp8266/tools/xtensa-lx106-elf-gcc/1.20.0-26-gb404fb9-2/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/bin/ld.exe: C:\Users\Scott\AppData\Local\Temp\build525647f6f8500d071cfab5cccf314276.tmp/ESPCANLogger.ino.elf section `.text' will not fit in region `iram1_0_seg'
collect2.exe: error: ld returned 1 exit status
See how to fix it after the break.
It’s working! As far as I can find, this is the first example of an MCP2515 CAN SPI module working with an ESP8266.
Previous post on my setup with ESP8266 and MCP2515
I have just bought another ESP8266/NodeMCU development board cheapy from eBay (this one) with an ESP-12E chip on board. I’ve also bought an SPI-CAN bus interface with the common Microchip MCP2515 CAN controller to try and create a CAN-Wifi gateway.
The pinout for the ESP-12E NodeMCU board is apparently as below: