New ESP32 WeMos Module

I ordered an ESP32 module from Ebay:

http://www.ebay.co.uk/itm/WeMos-D1-Mini-Mini-Pro-Compatible-Shields-Now-with-Triple-Base-and-ESP32-/322729576423?var=&hash=item4b242e87e7:m:mTDnl7ewzGuk9vFvBSGmXCA

The pinout for the board is shown here:

WeMos ESP32 Pinout

This module is packaged as WeMos compatible board. I’ve used the Wemos ESP8266 modules previously and they provide a neat stackable package with a few pre-built modules for SD card readers, OLED displays, etc.

Plugging the module in and viewing the serial data on boot at 115200 baud shows that ‘Happy Buddha Trading’ appear to install some test software on the device. It doesn’t seem to create a Wifi hotspot, but it does activate the Bluetooth module, which I can view from a phone but not pair to.

ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun 8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0008,len:8
load:0x3fff0010,len:160
load:0x40078000,len:10632
load:0x40080000,len:252
entry 0x40080034
BTDM CONTROLLER VERSION: 010101
btip start
copy .data from 4000d890 to 3ffae6e0, len 00001830
set .bss 0x0 from 3ffb8000 to 3ffbff70, len 00007f70
BTDM ROM VERSION 0101
BD_ADDR: 24:0A:C4:01:61:0E
NVDS MAGIC FAILED
RF Init OK with coex
Enable Classic BT
Enable Low Energy

Tested by Happy Buddha Trading

ESP32 Chip ID = 0C6101C40A24
ESP32 SDK: v2.0-rc1-803-g1e0710f1
Bluetooth LE Device 'ESP32_SimpleBLE started

Starting Wifi scan
Scan complete
2 networks found
1: TV License Surveillance (-69)
2: TALKTALKC4B0EE (-77)

Leave a Reply

Your email address will not be published. Required fields are marked *